Posted tagged ‘wow healing’

Preparing a Fight with World of Logs

January 28, 2013

When I want to really prepare for a fight, I don’t watch dozens of videos, I don’t compare various guides. Nope. When I want to go above and beyond to prepare for a fight, I go to World of Logs.

It can be more time consuming, but the depth of information is priceless. Plus, for those of us who need to apply knowledge in order to learn (if you were the kid who taught themselves math in high school by doing the exercises before reading the theory, WoL fight preparation is for you!), I find it’s the only way to get a solid idea of the fight before the pull.

Since I’ve been studying WoL a lot lately (and spamming posting my findings on my guild forums), I figured I’d share my approach, in case some of you would like to give this method a try.

Note that my strategy for tackling logs varies a bit from fight to fight depending on whether I want to observe general damage patterns, tank healing strategy or boss mechanics. It also depends on how much I already of the fight (learning the heroic version vs a completely new fight).

Together, you and I are going to prepare for Heroic Imperial Vizier Zor’lok.

1- Decide what we’re looking for

If you don’t know what you’re looking for, you won’t find it!

Let’s figure out our needs:

1) We (I) already know this fight on normal so we’re not too concerned about mechanics.
2) We know that this is a “heal through Force and Verve and don’t get hit by disks” fight so we’re not too interested in general healing strategies.
3) We do, however, want to get an idea of the overall damage patterns so we can choose our glyphs, talents and plan our cooldowns.

Now that we’ve figured out what we’re looking for, we’ll know not to waste time on individual healer spell breakdowns or incoming tank damage logs.

Instead, we’ll probably spend a lot of time looking at the “Total Damage Taken” graph and matching the spikes with the boss abilities from the Log Browser. We’ll probably also look at the “Deaths Overview” page to see what attacks tend to kill players. We might also want to compare a tank and a non-tank’s Damage Taken graphs with the Total Damage Taken graph.

If this is gibberish to you, don’t worry, I’ll explain it all in time.

2- Collect some background information

It does help to review a strat guide to get an idea of spell names (and general mechanics if this is a completely new fight) before perusing the logs. Even if you can’t understand general strat guides (I usually don’t), keep them opened in tabs for references.

Let’s open the Icy Veins strat and Pardeux’ strat.

3- Find some Logs

findinglogs

To find logs, select the fight (1), the size/difficulty (2) then the link to the kills (3).

To get a decent idea of what you’ll be facing, you’ll want to pick the logs of:

1) A recent kill (patches and hotfixes constantly change fights).
2) A kill in your language (it’s a lot of extra work to decode a foreign spell names).
3) A kill from a guild with comparable dps/healing strength.

findingguild

There are 106 pages of Vizier kills and I know my guild struggles a bit with dps performance, so I’m going straight to my URL bar (1) and to enter page 101 (if you’re not sure of the URL, go to the very bottom of the page and click on the “next” link on the far left. That will bring you to page 2. Then go back to your URL and replace “2″ with “101″.)

The “US Guild!” logs seem perfect – fairly recent, in my language and probably in my guild’s dps range.

I’m going to choose logs from another guild in the same range as well for comparison purposes. I’m also going to pull up logs of a recent kill by a top notch guild (in the first 10 pages of the kills list) so I can see how the fight looks when executed perfectly.

4- Note the Length of the Fight

Our “comparable” fights:

fightlength1
fightlength2

And our “top notch” fight:

fightlength3

Building our strat: Knowing the fight varies between 7 and 10.5 minutes is important for cooldown planning. Because the fights are long, we know we can use our “long” cooldowns like Guardian of Ancient Kings twice, and our “medium” cooldowns like Avenging Wrath or Divine Favor at least twice, preferably 3 times.

5- Look at Damage Taken

findingdmgtaken

If you choose Damage Taken from the dropdown bar, you’ll get a graph with a lot of lines. Scroll down to the list below the graphs and uncheck every box. You’ll end up with graphs like this:

dmgtaken1
dmgtaken2
dmgtaken3

The first two are our comparable guilds, the last is the top notch guild.

These graphs make me giddy because they are very much alike. Which means the damage patterns will look like this: spiky at first, then a lull with possible minor spikes, then several intense spikes for the last ~1/3 of the fight.

See the 5 buttons on the top right corner, just under “Total”? You can play with those to check who died to what and when, verify when adds die (not shown in the images I posted, but there are 2 adds in the fight) and show/hide heroism (heroism is shown in the images as the large blue bar).

Building our strat: This fits perfectly with our cooldowns! We’ll pop Guardian of the Ancient Kings and another cooldown for the first major spike. We can use other cooldowns if there are spikes during the “lull” phase, and all cooldowns should be ready for use by the time the final spiky phase comes along. As well, spikes mean we’ll probably want to spec into Holy Avenger for the yummy burst healing.

6- Match up Damage Spikes to Boss Abilities

findinglogbrowser

Open the log browser.

logquery

Once you’re in the log browser, remove the current query (1) (I’m not sure why “Show all events” comes up by default. It did take me a long time to figure out how to use the log browser because of that.) then hit “Add Query” (2). Once you’ve entered your query, hit “Run” (3).

addquery

When you hit “Add Query”, the “Add Query” window pops up. The log browser only shows a limited number of lines so you have to be specific in what you’re looking for. It does take a little practice to become good at finding what you’re looking for but once you figure it out, it’s simple.

For this analysis, I want to look at spells cast (1) by the Source Imperial Vizier Zor’lok (2) (note: spelling is important when using the log browser). Then I hit save.

zorlokcasts

After running the query, the log shows all of Zor’lok’s casts.

The rest is just matching up the spells to the Damage Taken graph. Note that there is often a 5-15 second difference between the timestamps on the log browser and the timestamps on the graph, which can be frustrating and confusing.

We can conclude that all the first minor spike is probably Pheromones of Zeal damage (I would guess comparable guild #2 started the fight on the first platform, hence why they only have one spike at the beginning while the other guilds have 2 spikes), the second is Force and Verve, small spikes in between are people getting hit during Attenuation, medium spikes are likely Converts and the major spikes at the end are Force and Verve during the final phase.

Building our strat: Force and Verve is going to hurt a lot, so we should be ready with our cooldowns as soon as he starts casting it. We also know that Force and Verve and Attenuation are physical damage so Devotion Aura will be useless against them (Devo Aura might be helpful would be during the transition between platforms or MAYBE during Convert, since those are the only times any Magic damage will be going out). Hand of Protection, however, might be nice making Clemency an interesting talent choice. We should glyph Divine Protection, and we could combine it with Unbreakable Spirit instead of choosing Clemency as well. Because Force and Verve is AoE damage while we’re grouped up, Light’s Hammer is a good talent choice too. Holy Prism may also be an option, though I’m feeling more Light’s Hammer.

7- Peak at the Deaths Overview

deathsoverview

The deathlog is probably my favorite part of logs because it shows you who dies to what and when. During post-raid analysis it quickly tells you who’s dying to avoidable damage. In a pre-raid analysis, it tells you which abilities to be ready for, and helps you differentiate deadly abilities from abilities that just hurt a lot.

In this kill, 10 players died to Attenuation, 10 died to Force and Verve and one tank died to normal melee damage.

Building our strat: This just re-enforces what we already know: Force and Verve is going to hurt (so all CDs, talents and Glyphs toward burst healing and reducing physical damage), and we should concentrate extra hard during Attenuation.

Conclusion!

There you have it! We’re set for Imperial Vizier Zor’lok!

And for your enjoyment, attached is a copy of what I posted on our guild forums. (more…)

Healing Garalon as a Holy Paladin

December 17, 2012

I interrupt my sequence of Holy Paladin Guide posts to whip out a boss healing strat. You see, since my last post, a number of people have sent me healing logs to look at (which is totally fine, I love analyzing logs, they make me happy) and too often the healing strat used on Garalon has made me yell out “NOOOOOOOOOooooooOOOOO!”

garalon

Curious as to how I would it?

I hope so.

Here’s how I would distribute healers for this fight:

Kiters (and backup tanks): Holy Paladin
Tanks: Disc Priest or second Holy Paladin
Raid: Everyone else

I’ve yet to try the fight on 10, but my instinct would say have the Holy Paladin on Kiters and Tanks and the second (and third, if applicable) healer on the entire raid.

Why a Holy Pally to heal Kiters?

So far, Garalon is my absolute favorite fight to heal. The mechanics of a kiter taking huge amounts of damage and two tanks taking sporadic damage play into our strengths with so much precision that it’s almost as if the fight itself were designed to pay tribute to our class.

My guild at the time first tried using a Druid on the Kiters (where they got THAT idea, I have not a clue). It was quite disastrous, with both the Kiter and the Druid dying frequently. Then I started pitching in despite being assigned to the tanks (I’m a pally dammit, I can handle a Kiter and two tanks). While I wasn’t even the official Kiter healer, I still ended up doing most of the healing. By next raid I was begging to be the official Kiter healer. Garalon bit the dust a few attempts later.

With a proper healing technique, keeping the Kiters alive (while still doing significant healing on the tanks) is totally possible, and actually pretty easy. Which is why I encourage you Holy Pallies out there to campaign for your right to heal Garalon kiters.

Recommended Talents and Glyphs

Level 15: Doesn’t matter
Level 30: Doesn’t matter
Level 45: Eternal Flame (if you are healing the kiters, don’t even try anything else)
Level 60: Unbreakable Spirit or Clemency (Purity won’t work on this fight. I tend to side with Clemency because Hand of Sacrifice is so good here, but there could be use for US as well.)
Level 75: Divine Purpose (any could work here, but there will be a lot of use for Divine Purpose)
Level 90: Light’s Hammer if you want an AoE or Execution Sentence if you want to boost your single target healing (I originally thought Holy Prism cast on the boss every 20 seconds would do a lot more healing overall, but testing revealed otherwise.)

Glyphs: Beacon of Light. (The rest is up to you, though I find Protector of the Innocent especially useful on this fight because of the constant raid damage. I tried Battle Healer since I like to melee for mana but it does very little actual healing. Another option would be Glyph of Divinity for the extra mana.)

Debuffs to track on your raid frame

Pungency. (Make sure that you can see the number of stacks.)

Positioning

All hail my mad Paint skillz!

All hail my mad Paint skillz!

Assuming Garalon will be moving in a clockwise position, stand to the right of his front right leg.

In this position, you should be in range of the Kiter and both tanks and close enough to melee for mana (and Battle Healer) on the front right leg. You can possibly reach Garalon himself. As our big bug turns, keeping a proper position should only take minimal movement, giving you plenty of time to cast to your little heart’s content.

Pre-Pull Prep

Have a Beacon of Light on your first Kiter (generally this will be one of your tanks). If you have time, get a maxed out Mastery bubble on your Beacon target, then toss a 3 Holy Power Eternal Flame on them to keep your Mastery from falling off.

If your guild takes forever to pull, use that time to put maxed out Mastery bubbles with 3 Holy Power Eternal Flames on both tanks.

If you still haven’t pulled yet, dump Eternal Flame on yourself, then on everyone else.

During the Fight

Keep Beacon on the current Kiter. Have 3 Holy Power Eternal Flames rolling on the Kiter and both tanks. If you have some wiggle-room, get an Eternal Flame up on yourself. If you’re bored, put as many Eternal Flames as you can on people in range, but be careful to not let it fall off the Kiter or the tanks.

To build up Holy Power, use Holy Shock on CD. You should be in range of the front right leg (and sometimes of the boss) so you can use Crusader Strike too. There’s a lot of raid damage going on so Holy Radiance is never a waste (use it on a non-tank, non-kiting melee if possible) but it can use up your mana bar pretty fast. And since your Kiter will be taking a lot of damage, a Divine Light will also be helpful to charge your Holy Power.

Hand of Sacrifice is to be used a lot on this fight. You can choose to use it on cooldown, or time it to help out on Kiter transitions. (When I was learning the fight, we had a Warlock who was squishier than the rest. I always made sure I timed my Sacrifice for it to be available to keep him alive during his transitions.)

Handling Transitions

Watch the stacks on the Kiter. When it is almost time to change Kiters (most guilds aim for a transition at 20 stacks, in which case you’d begin your process at about 16 stacks), get a 3 Holy Power Eternal Flame on the receiving Kiter, and transfer your Beacon. Make sure Eternal Flame doesn’t fall off your original Kiter until the transition is completely over and they are safely back in range of the raid healers.

By the time the new Kiter gets his first stack of Pungency, he should have Beacon and a 3 HP Eternal Flame on him.

If a transition is difficult, time your Hand of Sacrifice and Aura Mastery to be available for it.

Keeping yourself alive

If you are positioned right, you should in be in range of the raid healers. But to help them out, keep an Eternal Flame going on yourself whenever you can, and use Divine Shield and Divine Protection whenever they’re off CD.

Staying alive should be easy.

Now go out to play!

Like any fight use your CDs right and use them often, follow the strat and you should have a blast on Garalon!

EDIT: I made some changes to the post in light of some of the points raised in the comments. Huge thanks to everyone who left some input. It’s players like you guys who make it so much fun to be a holy pally.


Follow

Get every new post delivered to your Inbox.

Join 1,970 other followers